The polypropylene filter element replaces the traditional filter element and is a new generation of filter element. of breathability. It is a fixed-pore depth filter element with ultra-fine polypropylene fiber filter material as the filter medium, and the filter material meets the relevant FDA requirements. The filtration precision ranges from 0.1um to 60um, and its unique characteristics of low differential pressure, high flow rate and long service life make it the first choice for pre-filtration. All polypropylene construction provides stable performance and broad chemical compatibility.

Application range:

Pharmaceutical industry: filtration of liquid medicine, cell debris, biological products, etc.;

Chemical industry: filtration of organic solvents, chemical reagents, inks, electroplating solutions, etc.;

Food industry: filtration of drinking water, mineral water, beverages, beer, wine, fruit wine, etc.;

Electronics industry: pre-filtration of reverse osmosis water system, pre-filtration of deionized water system;

Gas filtration: filtration of compressed air, nitrogen, carbon dioxide, etc.;

Other industries: filtration of photoresist, magnetic media, etc.

Product advantages

Advanced microfiber polypropylene filter membrane with high filtration precision;

The imported folded filter element special mesh is used to make the diversion layer, there is no worry of fiber falling off, and the service life is long;

All polypropylene construction material, in line with USP Class VI biosafety standards;

Professional hot-melt technology makes the filter membrane and end cap tightly fused;

No adhesive, no secondary pollution;

Excellent chemical applicability, resistant to acid, alkali, alcohol, ketone, oil dimethylformamide, phenol and other chemical solvents;

Each filter element is 100% tested before leaving the factory to ensure the filter performance of the filter element.

Product parameters

Filter media: polypropylene fiber membrane

Upper and lower flow support material: polypropylene

Support frame and structural elements: Polypropylene

Filtration precision: 0.1, 0.2, 0.45, 0.65, 1, 2, 3, 5, 10, 20, 30, 60 (um)

Filter Length: 4", 5", 10", 20", 30", 40"

Sealing material: silicone rubber, nitrile rubber, EPDM rubber, fluorine rubber

Sealing method: hot melt welding

Effective filter area: 0.4～0.7 m/10"

Filter element diameter: 69.0 mm

Working temperature up to: 80℃, 0.28MPa

Positive differential pressure up to: 0.42MPa (25℃)

Back pressure difference up to: 0.28MPa (25℃)

Sterilization conditions: 121°C for 30 minutes